document number: 28744 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 11-mar-08 243 mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01 vishay beyschlag flat chip resistors with established reliability mcs 0402 vg01, mct 0603 vg01 and mcu 0805 vg01 thin film flat chip resistors wit h established reliability are the perfect choice for all high-reliability applications typically found in the fields of mili tary, aircraft and spacecraft electronics. these versions supplement the families of professional and precision thin film flat chip resistors mcs 0204, mct 0603 and mcu 0805. features ? approved according to en 140401-801, version e ? established reliability, failure rate level e6 ? advanced thin film technology ? advanced dissipation rating: 100 mw ? excellent overall stability: class 0.5 ? green product, supports lead (pb)-free soldering applications ? military ? avionics ? space notes ? the failure rate level e6 corresponds to mil level p ? these resistors do not feature a limited lifetime when operated wi thin the permissible limits. ho wever, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the spec ific application, thereby es tablishing a functional lifeti me. metric size inch: 0402 0603 0805 metric: rr 1005m rr 1608m rr 2012m e3 rohs compliant technical specifications description mcs 0402 mct 0603 mcu 0805 cecc size, style rr 1005m rr 1608m rr 2012m resistance range 100 to 100 k 10 to 1 m 1 to1m resistance tolerance 1 %; 0.1 % temperature coefficient 50 ppm/k; 15 ppm/k climatic category (lct/uct/days) 55/125/56 55/125/56 55/125/56 rated dissipation, p 70 0.063 w 0.1 w 0.125 w operating voltage, u max. ac/dc 50 v 75 v 150 v film temperature 125 c 125 c 125 c max. resistance change at p 70 for resistance range, r / r after: 100 to 100 k 10 to 1 m 1 to1m 1000 h 0.25 % 8000 h 0.5 % 225 000 h 1.5 % permissible voltage against ambient (insulation): 1 min; u ins 75 v 100 v 200 v continuous 75 v 75 v 75 v assessed failure rate level e6 fit observed 0.1 x 10 - 9 /h 0.1 x 10 - 9 /h 0.1 x 10 - 9 /h
mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01 vishay beyschlag flat chip resistors wit h established reliability www.vishay.com for technical questions, contac t: filmresistors.thinfilmchip@vishay.com document number: 28744 244 revision: 11-mar-08 notes (1) products can be ordered using the part number, pro duct description or en ordering information (2) please refer to table packaging, see next page (3) reference to en140401-801 version e part number and product description (1) part number: mct0603hc2871fp500 part number: mct0603hz0000zp500 model/size special character tcr value tolerance pac k ag i n g (2) special mcs0402 mct0603 mcu0805 h = vg01 cecc e6 e = 15 ppm/k c = 50 ppm/k z = jumper 3 digit value 1 digit multiplier multiplier 8 = *10 - 2 9 = *10 - 1 0 = *10 0 1 = *10 1 2 = *10 2 3 = *10 3 4 = *10 4 b = 0.1 % f = 1 % z = jumper p1 p5 e1 e0 pw up to 2 digits 00 = standard product description: mct 0603-50 1 % vg01 p5 287k product description: mct 0603 vg01 p5 0r0 mct 0603 - 50 1 % vg01 p5 287k mct 0603 - - vg01 p5 0r0 model size tcr tolerance established reliability packaging (2) resistance value mcs mct mcu 0402 0603 0805 15 ppm/k 50 ppm/k 0.1 % 1 % vg01 = cecc e6 (3) p1 p5 e1 e0 pw 562r = 562 287k = 287 k 1m0 = 1 m 0r0 = jumper en 140401-801 ordering information example of the ordering information for a resistor: mct 0603-50 1 % vg01 287k cecc40401-801ezrr1608mc287kfe6 example of the ordering information for jumpers: mct 0603 vg01 0r0 cecc40401-801ezrr1608m-0r00-e6 the elements used in this ordering information have the following meaning: cecc40401-801 ez rr1608m c 287k f e6 cecc detail specification number assessment level style (see table technical specification) temperature coefficient (c = 50 ppm/k; e = 15 ppm/k) resistance value according to en 60062, 4 characters tolerance on rated resistance (b = 0.1 %; f = 1 %) failure rate level according to en 60115-1, table zb.1 m c t 0 6 0 3 h z 0 0 0 0 z p 5 0 0 m c t 0 6 0 3 h c 2 8 7 1 f p 5 0 0
mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01 flat chip resistors wi th established reliability vishay beyschlag document number: 28744 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 11-mar-08 245 dimensions packaging model reel diameter pieces/ paper tape on reel code mcs 0402 vg01 180 mm/7" 1000 e1 180 mm/7" 10 000 e0 mct 0603 vg01 180 mm/7" 1000 p1 180 mm/7" 5000 p5 330 mm/13" 20 000 pw mcu 0805 vg01 180 mm/7" 1000 p1 180 mm/7" 5000 p5 330 mm/13" 20 000 pw dimensions - chip resistor types, mass and relevant physical dimensions type h (mm) l (mm) w (mm) w t (mm) t 1 (mm) t 2 (mm) mass (mg) mcs 0402 0.32 0.05 1.0 0.05 0.5 0.05 > 75 % of w 0.2 + 0.1/- 0.15 0.2 0.1 0.6 mct 0603 0.45 + 0.1/- 0.05 1.55 0.05 0.85 0.1 > 75 % of w 0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2 1.9 mcu 0805 0.45 + 0.1/- 0.05 2.0 0.1 1.25 0.15 > 75 % of w 0.4 + 0.1/- 0.2 0.4 + 0.1/- 0.2 4.6 t 2 t 1 l h w w t
mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01 vishay beyschlag flat chip resistors wit h established reliability www.vishay.com for technical questions, contac t: filmresistors.thinfilmchip@vishay.com document number: 28744 246 revision: 11-mar-08 description production is strictly controlle d and follows an extensive set of instructions established for reproducibility. a homogeneous film of metal alloy is deposited on a high grade (96 % al 2 o 3 ) ceramic substrate and conditioned to achieve the desired temperature coefficient. specially designed inner contacts are deposited on both sides. a special laser is used to achieve the target value by smoothly cutting a meander groove in the resistive layer without damaging the ceramics. for the high ohmic range, optimized cermet products provide comparable properties. the resistor elements are covered by a protective coat ing designed for electrical, mechanical and climatic protection. the terminations receive a final pure tin on nickel plating. the result of the determined production is verified by an extensive testing procedure and optical inspection performed on 100 % of the individual chip resistors. only accepted products are laid di rectly into the paper tape in accordance with en 60286-3 . assembly the resistors are suitable for processing on automatic smd assembly systems. they are su itable for automat ic soldering using wave, reflow or vapour phase as shown in iec 61760-1* . the encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. the suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. the resistors ar e rohs compliant; the pure tin plating provides compatibility with lead (pb)-free and lead-containing soldering processes. solderability is specified for 2 years after production or requalification. the permitted storage time is 20 years. the immunity of the plating against tin whisker growth has been proven under extensive testing. all products comply with the gadsl (1) and the cefic-eeca-eicta (2) list of legal restrictions on hazardous substances. this includes full compliance with the following directives: ? 2000/53/ec end of vehicle life directive (elv) and annex ii (elv ii) ? 2002/95/ec restriction of the use of hazardous substances directive (rohs) ? 2002/96/ec waste electrical and electronic equipment directive (weee) approvals the resistors are tested in accordance with en 140401-801 (superseding cecc 40401-801 ) which refers to en 60115-1 and en 140400 . approval of conformity is indicated by the cecc logo on the package label. vishay beyschlag has achieved ?approval of manufacturer? in accordance with en 100114-1 . the release certificate for ?technology appr oval schedule? in accordance with cecc 240 001 based on en 100114-6 is granted for the vishay beyschl ag manufacturing process. specials this product family of thin film flat chip resistors with established reliability is complemented by zero ohm jumpers . functional performance further information on the performance of these products may be found in the following data sheets: ? ?professional chip resistors? document no. 28705 ? ?precision chip resistors? document no. 28700 notes (1) global automotive declarable s ubstance list, see www.gadsl.org (2) cefic (european chemical industry council) , eeca (european electronic component manufac turers association), eicta (european tra de organisation representing the informati on and communications technology and cons umer electronics), see www.eicta.org issue environment policy chemicals chemicals for electronics
mcs 0402 vg01, mct 0603 vg01, mcu 0805 vg01 flat chip resistors wi th established reliability vishay beyschlag document number: 28744 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 11-mar-08 247 note ? resistance values to be selected for 1 % tolerance fr om e96 only and for 0.1 % tolerance from e192 only 12nc information for historical coding reference only part number ? the resistors have a 12-digit ordering code starting with 2312. ? the subsequent 4 digits indicate the resistor type, specification and packaging; see the part number table. ? the remaining 4 digits indicate the resistance value: ? the first 3 digits indicate the resistance value. ? the last digit indicates the resistance decade in accordance with the resistance decade table. resistance decade ordering example the part number of a mct 0603 vg01 resistor, value 287k and tcr 50 with 1 % toleranc e, supplied in cardboard tape of 5000 units per reel is: 2312 215 02874. temperature coefficient and resistance range description resistance value tcr tolerance mcs 0402 mct 0603 mcu 0805 50 ppm/k 1 % 100 to 100 k 10 to 1 m 1 to 1 m 15 ppm/k 0.1 % 100 to 33.2 k 100 to 47.5 k 100 to 100 k jumper - 20 m ; i max. = 0.63 a 20 m ; i max. = 1 a 20 m ; i max. = 1.5 a resistance decade last digit 1 to 9.99 8 10 to 99.9 9 100 to 999 1 1 k to 9.99 k 2 10 k to 99.9 k 3 100 k to 999 k 4 1m 5 part number - resistor type and packaging description ordering code 2312 ... ..... cardboard tape on reel type tcr tol. e1 1000 units e0 10 000 units mcs 0402 50 ppm/k 1 % 260 0.... 275 0.... 15 ppm/k 0.1 % 262 0.... 277 0.... jumper - 262 90001 277 90001 type tcr tol. p1 1000 units p5 5000 units pw 20 000 units mct 0603 50 ppm/k 1 % 200 0.... 215 0.... 205 0.... 15 ppm/k 0.1 % 202 0.... 217 0.... - jumper - 202 90001 217 90001 207 90001 mcu 0805 50 ppm/k 1 % 240 0.... 255 0.... 245 0.... 15 ppm/k 0.1 % 242 0.... 257 0.... - jumper - 242 90001 257 90001 247 90001
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
